This factory in the eastern suburbs was originally manufacturing cement and much of the product drifted upwards and out on to the roof ridge where it combined with the elements to form a thick layer of concrete.
The new owners contacted us seeking a roof clean – industrial to clear up the mess.
If you look at the photos, it gives some idea of the extent of the problem, exacerbated by the fact that the deposits were a good ten metres above ground level.
High pressure cleaning using one of our high volume blasters in conjunction with a heavy duty turbo-head provided the solution but we were asked to return on a rostered day off, with tests proving far too noisy for the Company’s workers inside the complex. Makes you wonder about the lung condition of the original staff, doesn’t it!
This large, modern terracotta tiled roof was cause for concern for the owner on several counts.
Recent attempts by others to clean it resulted in numerous broken tiles and with the surface far too slippery when wet to safely complete, the exercise had to be aborted.
Over the past five years we had used access equipment to clean the owner’s various commercial properties and he asked us if similar equipment could be used to clean his roof
- without churning up his manicured lawns, given the persistent recent heavy rainfall
- safely without actually stepping on to the roof and breaking the fragile tiles
- taking care not to damage the surface
We suggested a relatively light weight (less than 4 tonne) all terrain vehicle with outriggers and wide turf tyres with adequate horizontal and vertical reach. We also suggested using high volume equipment with sufficient (but without excessive) pressure, in conjunction with low dosage hypochlorite to facilitate cleaning without damaging the surface.
This methodology produced the desired result, as depicted in the photos below.
If you are looking for a quality finish from a Quality Assured Company with over 27 years in the Industry, give us a call on (07) 3300 6100
Iron Roof Restoration will enhance your property value. If your iron roof is not damaged but has superficial rust markings, it does not mean you need to re-roof. In fact, even if the the rust looks quite pronounced,, restoration is still a distinct possibility. At Waterworks, we can transform your old roof into almost new again and protect it for many more years to come, improving your property value and making it presentable for placing on the market.
The photos below tell the story. Basically this Ascot house needed sprucing up to put it on the market, so we suggested pressure cleaning, some minor repairs, application of a rust convertor and a couple of coats of Aluminium enamel. It’s not rocket science and the owners are delighted with the finished product.
looking worse for wear
You can be excused for thinking it’s a different roof
So much for aluminium enamels, you can also get your iron roof restored using acrylic coatings. The pictures below tell the story, whereby solar panels were removed to ensure nothing was missed, the rust converted, the roof high pressure cleaned , an etch primer applied followed by two coats of quality roof paint.
Solar panel removal to facilitate rust treatment prior to painting
Rust converted & etch primed where critical
Two airless applications of a quality roof coating complete the process
The good part about the acrylic coatings is you can opt for a quality insulation paint to reap further savings on your electricity bill.
Give us a call on 3300 6100 for an obligation free quote.
- 1
- 2